Khosh NC putty:
NO. 1170 for gray putty and no. 1110 for other (red iron oxide) putty.

General specifications:
Khosh Nitrocellolid putty No. 1170 for gray putty and No. 1110 for other (red iron oxide) putty has been produced on nitrocellulose resin, special alkyd base which has a high odbesion with underwork, and NC primer.

Uses:
NC primer can be used as the homogenizer of the thinner layer and to fill the tiny wholes of the surface for all types of vehicles.

Physical characteristics:
Gloss: less than 2% at 60 angle of glassometer
Color: 2 colors including gray and red iron oxide.
Gravimetric solid a mount: 67%-70%
Flash point: 18c.
Density of NC gray putty: 1.42-1.47 g/cm3.
Density of NC red iron oxid putty: 1.41-1.46 g/cm.
Surface drying time: less than 5 minutes at 25 c.
Minimum period for applying the other layer of the paint: 2 hours at 25 c.
Where to use? This type of putty should be applied on very clean and dry surface by spatula.